Kyli Johnson - Outback Guidance
- Total activity 574
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 276
Articles
Recent activity by Kyli Johnson - Outback Guidance-
S-Lite Recovery Software
Use this recovery process to reload S-Lite 1.5 software in the event, while updating to 1.5, the S-Lite screen shows "Load S2 1.4.
-
AC110 Matrix 6-08-2022
Click on link below (next to paper clip) to download and view matrix.
-
AC110 Dry Cable Adapter Selection Chart
-
Skip / overlap issue in one direction.
Symptom: When going in opposite directions the steering is sometimes off by an overlap or a skip. Cause: Occasionally this is an error caused by the GPS receiver in the automatic mode switching t...
-
Unable to export / import from the MAX.
Affects Software versions: 1.4.14.1.14181 and older. Symptom: The user is unable to export / import jobs from the MAX console. Cause: This is caused by a lack of GPS signal or the Max console is ...
-
STX with MAX Rover communication issues.
Symptom: The STX connects to the MAX rover but will not change settings and always shows mode PC1 even on 900 MHz systems. Cause: The baud rate is incorrectly set to communicate with the STX on ...
-
REBEL won't connect to NTRIP RTK network (i.e. Digifarm, MyWayRTK, CORS)
Symptom: REBEL won't connect to NTRIP RTK network (i.e. Digifarm, MyWayRTK, CORS). Cause: REBEL isn't connected to WiFi on a mobile Hotspot. Resolution: Confirm your cellular Hotspot is turned on,...
-
Issues installing 1.4.22 software on the MAX.
Symptom: User cannot update to 1.4.22 application software on the MAX. Cause: The 1.4.22 update is an .OTA file, whereas, it installs a new BIOS. It requires the the MAX be updated to 1.4.14 pri...
-
The rate control switch box will not connect to the cable 051-0269-000# labeled "Switch" .
Symptom: The rate control switch box will not connect to the cable 051-0269 labeled "Switch" . Cause: The "White" connector coming from the MAX labeled "Switch" is for the connection of a mapping ...
-
REBEL won't connect to NTRIP RTK network.
Symptom: REBEL won't connect to NTRIP RTK network. Cause(s): The Rebel A325 or A222 Smart Antenna isn't unlocked to L2 and RTK. RTK network credentials aren't entered correctly. Resolution(s):...