Jake Shoemaker Technical Support - Outback Guidance

  • Total activity 859
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 0
  • Subscriptions 431

Activity overview

Latest activity by Jake Shoemaker Technical Support - Outback Guidance
  • Jake Shoemaker Technical Support - Outback Guidance created an article,

    Auto-Engage

    Auto-Engage is an eDriveXD feature that works with all guidance modes with the following requirements/conditions:    • For hydraulic valve type vehicles only.   • Can be used only when the vehicle ...

  • Jake Shoemaker Technical Support - Outback Guidance created an article,

    Outback at Farm Progress 2019

  • Jake Shoemaker Technical Support - Outback Guidance created an article,

    Rebel Packages at Farm Progress 2019

  • Jake Shoemaker Technical Support - Outback Guidance created an article,

    Rebel Trade In and ESP Show Special at Farm Progress 2019

  • Jake Shoemaker Technical Support - Outback Guidance created an article,

    Adding an AC110 Implement - Rate Control Settings for Dry Rate Control (Spinner)

    Before you can use your implement for spreading operations, you must configure and calibrate it for rate control via the Rate Control Settings panel. For spreading operations, you must configure bo...

  • Jake Shoemaker Technical Support - Outback Guidance created an article,

    Adding an AC110 Implement - Rate Control Settings for Dry Rate Control (Conveyor)

    Before you can use your implement for spreading operations, you must configure and calibrate it for rate control via the Rate Control Settings panel. For spreading operations, you must configure bo...

  • Jake Shoemaker Technical Support - Outback Guidance created an article,

    Adding an AC110 Implement - Rate Control Settings for Non-Spreading Operations

    Before you can use your implement for non-spreading operations, you must configure and calibrate it for rate control via the Rate Control Settings panel (Menu > Implement Profiles > New Implement P...

  • Jake Shoemaker Technical Support - Outback Guidance created an article,

    Adding an AC110 Implement - Rate Control Settings Overview

    Adding an AC110 Implement - Rate Control Settings Overview Rate control configuration (settings) depends on the operation. You must configure each implement that you will use for rate control. Impl...

  • Jake Shoemaker Technical Support - Outback Guidance created an article,

    Adding an AC110 Implement - Implement Settings

    Implement Settings After entering the AC110 implement name and mount type, you can enter implement settings. On the New Implement Profile panel, press Implement Settings to display the Implement Se...

  • Jake Shoemaker Technical Support - Outback Guidance created an article,

    Adding an AC110 Implement - Name and Mount Type

    When entering the implement name, use a name you will recognize if entering many implements.  REBEL enables you to select from four distinct mount types:   • (2) rigid types: Rigid Rear (rigid moun...