Adding an AC110 Implement - Rate Control Settings Overview
Rate control configuration (settings) depends on the operation. You must configure each implement that you will use for rate control. Implement configuration includes calibration; perform the following (with the vehicle parked or moving) before calibrating the flow:
• Make sure the tank is clean then fill with several hundred gallons of water.
• Unfold the booms and move the vehicle to a safe location.
• Make sure the vehicle is running at the operating RPM used for spraying.
Use the links below and figures on the next page to help you configure your implement for rate control.
|
AC110 All Operations except Spreading: • “Adding an AC110 Implement - Rate Control Settings for Non-Spreading Operations” |
AC110 Spreading Operation: • “Adding an AC110 Implement - Rate Control Settings for Dry Rate Control (Conveyor)” • “Adding an AC110 Implement - Rate Control Settings for Dry Rate Control (Spinner)” |
 |
 |